SL airport shoreline project begins

Construction is expected to begin the week of Oct. 19 on a $1.28-million shoreline erosion protection project at the Slave Lake airport, the airport’s manager says.

Airport manager Pierre Gauthier says the project, which involved six years of planning, will protect the shoreline near the end of the runway, where severe erosion threatens the airport’s required safety area.

High water levels and waves in 2020 caused approximately 40 feet of shoreline to disappear within a couple of weeks.
Gauthier says the airport must maintain a 60-metre safety area at the end of the runway. Following the erosion, only about one metre remained between the water and that safety area.

Further erosion could have forced the airport to shorten its runway, relocate lights and repaint runway markings.
After years of discussions about funding and possible solutions, Gauthier says there is now a plan and the project is finally moving forward.

“We got grant money in place,” Gauthier says.

The project received three construction bids, with Formula Alberta selected for a contract valued at $1,284,600.
Of that amount, $1,025,500 will be covered through an Alberta government drought and flood grant.

Construction is expected to take two to three weeks and will involve installing 14-foot interlocking metal sheet piles into the ground to create a protective wall against further erosion.

During construction, the airport runway will be temporarily shortened by 874 feet between sunrise and sunset to allow contractors to work without having to move equipment for arriving or departing aircraft.

Gauthier says approximately 4,700 feet of runway will remain available, allowing medevac aircraft to continue operating safely.

“So, the only thing that happens is they have less runway, but our runway is long enough to still allow medevac to come and go safely,” he says.

For Gauthier, the start of construction brings relief after years of uncertainty about the shoreline and the possibility of rising water levels.

“I feel relief,” he says. “It’s been an ongoing discussion at our board meetings and trying to figure out how – how to do it, where the money is going to come from.”

The project is expected to be a one-time construction effort, with the sheet piling providing long-term protection for the runway and surrounding airport infrastructure.

Gauthier says most residents will not notice the construction, although the protective wall may be visible from the beach at Big Fish Bay.

He emphasizes that the project is important for maintaining safe airport operations and preventing future runway restrictions.

“It is an important project for the community to maintain airport infrastructure,” he says.

The Lakeside Leader plans to photograph the shoreline protection work once construction gets underway and publish photos in an upcoming edition.

Julia Magsombol
Lakeside Leader

Share this post

Post Comment